交换机接口一直up/down

lianghk

有个vlan  里面的接口一会up一会down  别的接口都正常   麻烦大家看看  谢谢了，实在是搞不太懂了May 13 2019 10:14:15 huiju %%01IFADP/4/PORTDOWNINFO(l)[9]:Interface GigabitEthernet0/0/14 has turned into DOWN state. (Information=Physical state: DOWN, Negotiation: ENABLE, Negotiation complete: No, Local full-duplex(10M: Yes, 100M: Yes, 1000M: Yes, 2.5G: No, 10G: No), Local half-duplex(10M: Yes, 100M: Yes, 1000M: No, 2.5G: No, 10G: No), Remote full-duplex(10M: No, 100M: No, 1000M: No, 2.5G: No, 10G: No), Remote half-duplex(10M: No, 100M: No, 1000M: No, 2.5G: No, 10G: No))
May 13 2019 10:14:15 huiju %%01IFPDT/4/IF_STATE(l)[10]:Interface GigabitEthernet0/0/14 has turned into DOWN state.
May 13 2019 10:14:19 huiju %%01IFPDT/4/IF_STATE(l)[11]:Interface GigabitEthernet0/0/14 has turned into UP state.
May 13 2019 10:15:50 huiju %%01IFADP/4/PORTDOWNINFO(l)[12]:Interface GigabitEthernet0/0/18 has turned into DOWN state. (Information=Physical state: DOWN, Negotiation: ENABLE, Negotiation complete: No, Local full-duplex(10M: Yes, 100M: Yes, 1000M: Yes, 2.5G: No, 10G: No), Local half-duplex(10M: Yes, 100M: Yes, 1000M: No, 2.5G: No, 10G: No), Remote full-duplex(10M: No, 100M: No, 1000M: No, 2.5G: No, 10G: No), Remote half-duplex(10M: No, 100M: No, 1000M: No, 2.5G: No, 10G: No))
May 13 2019 10:15:50 huiju %%01IFPDT/4/IF_STATE(l)[13]:Interface GigabitEthernet0/0/18 has turned into DOWN state.
May 13 2019 10:15:54 huiju %%01IFPDT/4/IF_STATE(l)[14]:Interface GigabitEthernet0/0/18 has turned into UP state.
May 13 2019 10:16:13 huiju %%01IFADP/4/PORTDOWNINFO(l)[15]:Interface GigabitEthernet0/0/8 has turned into DOWN state. (Information=Physical state: DOWN, Negotiation: ENABLE, Negotiation complete: No, Local full-duplex(10M: Yes, 100M: Yes, 1000M: Yes, 2.5G: No, 10G: No), Local half-duplex(10M: Yes, 100M: Yes, 1000M: No, 2.5G: No, 10G: No), Remote full-duplex(10M: No, 100M: No, 1000M: No, 2.5G: No, 10G: No), Remote half-duplex(10M: No, 100M: No, 1000M: No, 2.5G: No, 10G: No))
May 13 2019 10:16:13 huiju %%01IFPDT/4/IF_STATE(l)[16]:Interface GigabitEthernet0/0/8 has turned into DOWN state.
May 13 2019 10:16:18 huiju %%01IFPDT/4/IF_STATE(l)[17]:Interface GigabitEthernet0/0/8 has turned into UP state.
May 13 2019 10:16:52 huiju %%01IFADP/4/PORTDOWNINFO(l)[18]:Interface GigabitEthernet0/0/15 has turned into DOWN state. (Information=Physical state: DOWN, Negotiation: ENABLE, Negotiation complete: No, Local full-duplex(10M: Yes, 100M: Yes, 1000M: Yes, 2.5G: No, 10G: No), Local half-duplex(10M: Yes, 100M: Yes, 1000M: No, 2.5G: No, 10G: No), Remote full-duplex(10M: No, 100M: No, 1000M: No, 2.5G: No, 10G: No), Remote half-duplex(10M: No, 100M: No, 1000M: No, 2.5G: No, 10G: No))
May 13 2019 10:16:52 huiju %%01IFPDT/4/IF_STATE(l)[19]:Interface GigabitEthernet0/0/15 has turned into DOWN state.
May 13 2019 10:16:56 huiju %%01IFPDT/4/IF_STATE(l)[20]:Interface GigabitEthernet0/0/15 has turned into UP state.
May 13 2019 10:17:37 huiju %%01IFADP/4/PORTDOWNINFO(l)[21]:Interface GigabitEthernet0/0/14 has turned into DOWN state. (Information=Physical state: DOWN, Negotiation: ENABLE, Negotiation complete: No, Local full-duplex(10M: Yes, 100M: Yes, 1000M: Yes, 2.5G: No, 10G: No), Local half-duplex(10M: Yes, 100M: Yes, 1000M: No, 2.5G: No, 10G: No), Remote full-duplex(10M: No, 100M: No, 1000M: No, 2.5G: No, 10G: No), Remote half-duplex(10M: No, 100M: No, 1000M: No, 2.5G: No, 10G: No))
May 13 2019 10:17:37 huiju %%01IFPDT/4/IF_STATE(l)[22]:Interface GigabitEthernet0/0/14 has turned into DOWN state.
May 13 2019 10:17:41 huiju %%01IFPDT/4/IF_STATE(l)[23]:Interface GigabitEthernet0/0/14 has turned into UP state.
May 13 2019 10:19:13 huiju %%01IFADP/4/PORTDOWNINFO(l)[24]:Interface GigabitEthernet0/0/18 has turned into DOWN state. (Information=Physical state: DOWN, Negotiation: ENABLE, Negotiation complete: No, Local full-duplex(10M: Yes, 100M: Yes, 1000M: Yes, 2.5G: No, 10G: No), Local half-duplex(10M: Yes, 100M: Yes, 1000M: No, 2.5G: No, 10G: No), Remote full-duplex(10M: No, 100M: No, 1000M: No, 2.5G: No, 10G: No), Remote half-duplex(10M: No, 100M: No, 1000M: No, 2.5G: No, 10G: No))
May 13 2019 10:19:13 huiju %%01IFPDT/4/IF_STATE(l)[25]:Interface GigabitEthernet0/0/18 has turned into DOWN state.
May 13 2019 10:19:16 huiju %%01IFPDT/4/IF_STATE(l)[26]:Interface GigabitEthernet0/0/18 has turned into UP state.
May 13 2019 10:20:14 huiju %%01IFADP/4/PORTDOWNINFO(l)[27]:Interface GigabitEthernet0/0/15 has turned into DOWN state. (Information=Physical state: DOWN, Negotiation: ENABLE, Negotiation complete: No, Local full-duplex(10M: Yes, 100M: Yes, 1000M: Yes, 2.5G: No, 10G: No), Local half-duplex(10M: Yes, 100M: Yes, 1000M: No, 2.5G: No, 10G: No), Remote full-duplex(10M: No, 100M: No, 1000M: No, 2.5G: No, 10G: No), Remote half-duplex(10M: No, 100M: No, 1000M: No, 2.5G: No, 10G: No))

墨韵紫衫

很明显的双工不匹配……half和full

biankuai945

双工不匹配

373934917@qq.co

同样的问题，跪求解决方法，我已关闭了自协商功能，不知道为什么还是会这样，我的端口配置如下：
interface GigabitEthernet1/0/1
undo negotiation auto
speed 100
port link-type hybrid
voice-vlan 401 enable include-untagged
voice-vlan remark-mode mac-address
port hybrid pvid vlan 301
port hybrid untagged vlan 301 to 401
stp edged-port enable

swedenbin

把MB改小点再半工

liuhuan3113

thank you very very much

1813344866

373934917@qq.co 发表于 2019-11-29 18:05
同样的问题，跪求解决方法，我已关闭了自协商功能，不知道为什么还是会这样，我的端口配置如下：
interfac ...

stp edged-port enable
你配置了边缘接口，
还用hrbrid？

唍媄。o煙圈@

端口配置有问题。