瘦AP转胖AP操作步骤

goodluck

Step 1: the PC on which your TFTP server software runs must be configured with a static IP Address in the range of 10.0.0.2 to 10.0.0.30
*********PC的地址必须配置为10.0.0.2到10.0.0.30 这个范围*****
Step 2: Make sure that the PC contains the access point image file(such as c2602r-K9w7-tar.123-7.JA.tar for a 1200 series acess point ) in the TFTP server folder and the TFTP server is activated.
*******PC上必须有相应的胖AP的IOS文件****************
Step 3:Rename the access point image file in the TFTP server folder to
C1200-k9w7-tar.default for a 1200 series access point.
*******重命名这个文件到C1XXX-k9w7-tar.default**********
Step 4:Connect the pc to the access point using a Category 5(CAT 5)Ethernet cable.
******用网线连接PC和AP********************
Step 5******切断AP的电源************************
Step 6******按住MODE键，并重新连接电源***********
Step 7:Hold the MODE button until the status LED turns red(about 20~30 seconds) ,then realease the MODE button
*******按住MODE键，直到LED灯变红（大概20到30秒的时间）
Step 8:Wait until the access point reboots as indicated by all LEDS        turning green followed by the status LED blinking green .
**等到AP重启并且LED灯变绿即可*******

瘦AP转胖AP操作步骤.doc (13 KB, 下载次数: 50)

2014-3-28 10:21 上传

点击文件名下载附件

peter123

vscdsc

peter123