CCNP 低分收官 821

UID: 309594

今天考试，真是考的蛋痛，做了好几遍都是找不到BUG，太气人了，但是最终还是PASS了，总的来说，这次考试还是比较顺利的，虽然总是找不到和题库一样的答案，但是题库还是覆盖较广，TK覆盖100%，各位哥们做题时一定要慢慢的来，千万不要心急，里面的错误有一些比较难看出。虽然题库是100%覆盖，但是做题时还是要仔细，看题库是重在理解，不要一味的背题库，或许背题库你会吃亏，一定要注重理解。642-832考试考的重在心态，不要看着题库少，就想马上搞定，千万不要有这种想法，还是多花一些时间看看，这样是最安全的，做题方法论坛前辈们也有很多的做法，最实际的就是万金油做法：
以下为个人做法（万金油变种）：
（1）HRSP Track→DSW1→HRSP→Under the interface vlan 10 configuration delete standby 10 track 1 decrement 60 command and enter standby 10 track 10 decrement 60 command
（2）IPV6 OSPF→R2→IPV6 OSPF Routing→Under the interface serial 0/0/0.23 configuration enter the ipv6 ospf 6 area 0 command
（3）DHCP→R4→IP DHCP Server→Under the global configuration,issue the no ip dhcp excluded-address 10.2.1.1 10.2.1.253 command and enter the ip dhcp excluded-address 10.2.1.1 10.2.1.2 command
# n7 [' R% K7 Q" N) f; ]* L（4）Port Security→ASW1→Port Security→In configuration mode,using the interface range fa1/0/1 - 2, then no switchport-security,followed by shutdown,no shutdown interface configuration command
) I8 d) m9 k- [" O" z% r  ~9 D+ l4 e（5）Access VLAN→ASW1→Access VLANS→In configuration mode ,using the interface range fa 1/0/1 - 2,then switchport access vlan 10 command
（6）Trunk→ASW1→Switch to Switch connectivity→In configration mode,using the interface port-channel 13,port-channel 23, then configure switchport trunk allowed vlan none followed by switchport trunk allowed vlan 10,200 command
（7）VLAN Filter→DSW1→VLAN ACL / Port ACL→Under the global configuration mode enter no vlan filter test1 vlan-list 10 command
（8）EIGRP Passive→R4→IPV4 EIGRP Routing→Remove “passive interface” in interface fa 0/1 and fa 0/0
: i; y2 N# d" D4 B7 W' Z: g（9）EIGRP Redistribute→R4→IPV4 Router Redistribute→Under the EIGRP process,delete the redistribute ospf 1 route-map ospf_to_eigrp command enter the redistribute ospf 1 route-map ospf->eigrp command
3 F0 ^0 h+ R! x6 L$ |  c& L（10）IP Authentication→R1→IPV4 OSPF→Enable ospf Authentication on the s0/0/0 interface using the ip ospf authentication message-digest command
) Z& U! W4 g, |* r4 z; L: A. G3 \（11）NAT→R1→NAT→Under the ip access-list standard nat_trafic configuration enter the permit 10.2.0.0 0.0.255.255 command
6 j! U" ]9 I- r* {) M: w（12）BGP→R1→BGP→Under the BGP process,delete the neighbor 209.56.200.226 remote-as 65002 command enter the neighbor 209.65.200.226 remote-as 65002 command
（13）ACL→R1→IPV4 Layer 3 Security→Under the ip access-list edge_security configuration add the permit ip 209.65.200.224 0.0.03 any command
" N% |! O3 K8 v5 }（14）EIGRP AS→R4→IPV4 EIGRP Routing→Change the AS number on the EIGRP routing process from 1 to 10 to much the AS number used on DSW1 and DSW2
8 b, ~2 y. H$ O+ L( _6 ^
附上万金油做法，预祝各位哥们顺利PASS！！

$ Z+ n1 T2 E& x8 v万金油.doc(1.41MB)
万金油超级解法.doc(28.5KB)

UID: 309594

游客，如果您要查看本帖隐藏内容请登录

UID: 278866

游客，如果您要查看本帖隐藏内容请登录

UID: 124594

游客，如果您要查看本帖隐藏内容请登录

UID: 309594

游客，如果您要查看本帖隐藏内容请登录

UID: 62919

游客，如果您要查看本帖隐藏内容请登录

UID: 259060

游客，如果您要查看本帖隐藏内容请登录

UID: 225495

游客，如果您要查看本帖隐藏内容请登录

UID: 137870

游客，如果您要查看本帖隐藏内容请登录

UID: 328146

游客，如果您要查看本帖隐藏内容请登录