tb51cx 发表于 2017-7-17 11:44:02

请教个H3C IRF堆叠报错的问题。

%Jul 17 11:39:58:716 2017 H3C STM/6/STM_LINK_UP: IRF port 1 came up.
%Jul 17 11:39:58:796 2017 H3C DSTM/1/DRV_DSTM: STM stackability check: IRF port index conflict. Self port index is 1, peer port index is 1.

%Jul 17 11:39:58:796 2017 H3C STM/3/STM_SOMER_CHECK: Neighbor of IRF port 1 can't be stacked.
%Jul 17 11:39:58:997 2017 H3C STM/3/STM_LINK_DOWN: IRF port 1 went down.


以上是报错内容。

拓扑如下
switch1 通过XGE 1/0/49 链接 switch2 XGE 1/0/49
switch1 通过XGE 1/0/50 链接 switch2 XGE 1/0/50

switch1 配置

sys
irf member 1 priority 31


interface rangeTen-GigabitEthernet 1/0/49 to Ten-GigabitEthernet 1/0/50
shutdwon
exit

irf-port 1/1
port group interface Ten-GigabitEthernet 1/0/49
port group interface Ten-GigabitEthernet 1/0/50
exit



interface rangeTen-GigabitEthernet 1/0/49 to Ten-GigabitEthernet 1/0/50
undo shutdown
exit

irf-port-configuration active

switch2配置

sys
irf member 1 renumber 2
exit save
reboot




sys


interface rangeTen-GigabitEthernet 2/0/49 to Ten-GigabitEthernet 2/0/50
shutdwon
exit

irf-port 2/1
port group interface Ten-GigabitEthernet 2/0/49
port group interface Ten-GigabitEthernet 2/0/50
exit

interface rangeTen-GigabitEthernet 2/0/49 to Ten-GigabitEthernet 2/0/50
undo shutdwon
exit

irf-port-configuration active

wu8606300 发表于 2017-7-17 12:47:52

配置呢

tb51cx 发表于 2017-7-17 13:13:42

@wu8606300 有配置啊

tb51cx 发表于 2017-7-17 17:42:10

就没有一个明白人？

tb51cx 发表于 2017-7-17 18:47:26


就没有一个明白人？

tb51cx 发表于 2017-7-17 21:25:50

就没有一个明白人？

lzp321 发表于 2019-2-18 21:39:13

irf-port 1/1 和后面的irf-port 2/1后面的1不能一致，必须是一个是1一个是2 比如：irf-port 1/1 和后面的irf-port 2/2 这样才能IRF堆叠成功。Self port index is 1, peer port index is 1.你这个日志也反馈这样的问题了。
页: [1]
查看完整版本: 请教个H3C IRF堆叠报错的问题。