用2811路由器尝试做个无线连接,屡次失败,请求大神点播
Router>Router>en
Router#config t
Enter configuration commands, one per line.End with CNTL/Z.
Router(config)#int dot11radio0/1/0
Router(config-if)#ip address 172.16.10.1 255.255.255.0
Router(config-if)#description WLAN for Mobile User
Router(config-if)#no shut
%LINK-5-CHANGED: Interface Dot11Radio0/1/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0/1/0, changed state to up
Router(config-if)#ssid ADMIN
%LINK-5-CHANGED: Interface Dot11Radio0/1/0, changed state to administratively down
%LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0/1/0, changed state to down
%LINK-5-CHANGED: Interface Dot11Radio0/1/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0/1/0, changed state to up
感谢LZ分享,努力学习中{:6_265:}{:6_267:} {:soso_e127:},我是来求助的,不是分享额,接口起来了,为什么打了ssid之后,为什么不又自动关闭了呢 按照书上情况如下:
R3(config-if)#int dotllradi oOjOjO
R3(config-if)#ip address 172.16.10.1 255.255.255.0
R3(config-if)# description WLAN for Mobile User
R3(config-if)#no shut
R3(config-if)#ssid ADMIN
R3(config-if-ssid)#guest-mode
R3(config-if-ssid)#authentication open
R3(config-if-ssid)#infrastructure-ssid
没人懂么?{:soso_e105:} ssid ADMIN 这是书上的错误
你输入 dot11 ssid ADMIN 就行了吧
我看考试指南第七版 在这卡了很长时间百度了半天才知道是书错了 piecer 发表于 2013-9-12 10:46 static/image/common/back.gif
ssid ADMIN 这是书上的错误
你输入 dot11 ssid ADMIN 就行了吧
谢谢你的回答,想问一下,下面一条guest-mode仍旧敲不上去额,这个问题困扰我很久了呀,麻烦你能不能给我一个完全的呀,谢谢额。此实验来自ccna学习指南第七版,276页,非常感谢 笨蛋,大笨蛋 发表于 2013-9-12 15:40
谢谢你的回答,想问一下,下面一条guest-mode仍旧敲不上去额,这个问题困扰我很久了呀,麻烦你能不能给我 ...
so 解决了吗?现在遇到同样的问题了。。。那个guest-mode怎么办???{:6_275:} 遇到了同样的问题!
页:
[1]